Difference between revisions of "Adding a lift"

From Senfi Docs
Jump to: navigation, search
Line 1: Line 1:
−
To Start adding a lift, you need to do the following:
+
To Start adding a lift, make sure the following are ready:
−
# [[Adding_a_site|Create Site]]
+
# Site that lift located. Please [[Adding_a_site|Create Site]] if not created yet.
−
# [[Sending_data_to_Senfi#Design/create_measurement|Create Measurement]]
+
# Note down measurements that Lift produces.
−
# Create '''Lobby'''
+
# Create '''Lobby''' if not created yet.
  
 
=== Create Lobby ===
 
=== Create Lobby ===
Line 18: Line 18:
 
# Add Lift Name
 
# Add Lift Name
 
# Select '''Site''', '''Building''', '''Lobby'''
 
# Select '''Site''', '''Building''', '''Lobby'''
−
# Select one or more '''Blocks'''
+
# Select one or more '''Blocks''' that Lift can travel.
−
# Select '''Stops'''
+
# Select '''[[Lift#Stop|Stops]]'''
−
# Select '''Measurement''' that created previously
+
# Select '''Measurements''' that noted down previously
−
# Add '''[[Concepts#Tag|Tags]]'''
+
# Add '''[[Concepts#Tag|Tags]]''' value that required for identification
 
# Click icon image to change the default icon
 
# Click icon image to change the default icon
 
# Click '''EDIT LIFT POSITION''' button to enter edit mode
 
# Click '''EDIT LIFT POSITION''' button to enter edit mode

Revision as of 14:51, 26 September 2019

To Start adding a lift, make sure the following are ready:

  1. Site that lift located. Please Create Site if not created yet.
  2. Note down measurements that Lift produces.
  3. Create Lobby if not created yet.

Create Lobby

  1. Login to the CMS
  2. Go to the Lift > Lobby tab
  3. Click the + button
  4. Add Lobby Name
  5. Select Site and Building
  6. Click Save

Add new Lift

  1. Login to the CMS
  2. Go to the Lift tab
  3. Click the + button
  4. Add Lift Name
  5. Select Site, Building, Lobby
  6. Select one or more Blocks that Lift can travel.
  7. Select Stops
  8. Select Measurements that noted down previously
  9. Add Tags value that required for identification
  10. Click icon image to change the default icon
  11. Click EDIT LIFT POSITION button to enter edit mode
  12. Move mouse in the 3D view to place the lift
  13. Single click to confirm the location of the lift
  14. Select the color of the lift shaft
  15. Click SAVE
Note: LSID is the lift's unique ID using in Senfi and cannot be changed after creation
Retrieved from "https://www.senfi.io/docs/index.php?title=Adding_a_lift&oldid=468"