Difference between revisions of "Adding a sensor"
From Senfi Docs
(Marked this version for translation) |
|||
| Line 1: | Line 1: | ||
<translate> | <translate> | ||
| + | <!--T:1--> | ||
To Start adding a sensor, you need to do the following: | To Start adding a sensor, you need to do the following: | ||
# Site that lift located. Please [[Adding_a_site|Create Site]] if not created yet. | # Site that lift located. Please [[Adding_a_site|Create Site]] if not created yet. | ||
# Note down measurement that Sensor produces. (Managed Sensor) | # Note down measurement that Sensor produces. (Managed Sensor) | ||
| − | === Add new Sensor === | + | === Add new Sensor === <!--T:2--> |
# Login to the [https://ems.senfi.io/cms CMS] | # Login to the [https://ems.senfi.io/cms CMS] | ||
# Go to the '''Sensor''' tab | # Go to the '''Sensor''' tab | ||
Revision as of 14:18, 17 October 2019
To Start adding a sensor, you need to do the following:
- Site that lift located. Please Create Site if not created yet.
- Note down measurement that Sensor produces. (Managed Sensor)
Add new Sensor
- Login to the CMS
- Go to the Sensor tab
- Click the + button
- Add Sensor Name
- Select Site
- Select Building, Block, Level (Optional)
- Choose Unmanaged Sensor or Managed Sensor
- Managed Sensor
- Select Measurement that noted down previously
- Add Tags value that required for identification
- Unmanaged Sensor
- Add iFrame Source
- Click icon image to change the default icon
- Click EDIT LOCATION button to enter edit mode
- Move mouse in the 3D/2D view to place the sensor
- Single click to confirm the location of the sensor
- Click SAVE