V2/CMS Tutorial/User Tools/Creating Content/Site/Add Site/Handdrawn

Add Site with Hand Drawn Model

This section covers the following topics:

• General Steps
• Fill in BBL information
• Footprint

Note: Mandatory fields are marked with an ‘*’. The following steps assume that the user is already logged in to the CMS.

Steps

1. Go to the Site tab and select ADD NEW.
2. Fill in the necessary fields (E.g. Site Name, Description, Country, Address etc.).
3. Add Geolocation (optional):
   1. Select Geolocation.
   2. There are two ways to select location:
      • Search: Use the Search function to look for the specific location.
      • Drop Pin: Select EDIT and drop pin on the map.
      • See Tip and Note (below).
   3. Select 'OK' to add geolocation. This will automatically update the country of the site but not its address.
4. Choose User Drawn model type.
5. Fill in Building, Block & Level (BBL) information under Building, Block & Level section.
6. Draw site’s footprint.
7. Select 'SUBMIT' (top right corner) to add the site.
8. Once the 3D model has been processed, further action will be prompted.
   

   Prompt for further action
9. Select Edit beside the site you just created.
10. Select the warning at the top of the screen.
11. Set the site’s default view.
12. Set the site’s thumbnail (optional).
13. Add 2D Floorplans for each level (optional).
14. Select 'SAVE' or 'SAVE & EXIT' (top right corner).

Tip: Subsequently, the pin can be dragged to different positions on the map.

Note: For subsequent changes, the displayed address will not be automatically updated. The Use Address button must be selected to update the address.

Fill in BBL Information

Add Building (Optional)

1. Select Add beside Site Name.
2. Insert Building Name.
3. Select 'SAVE'.

Rename Building (Optional)

1. Select Edit beside Building Name.
2. Rename Building.
3. Select 'SAVE'.

Add Block (Optional)

1. Select Add beside Building Name.
2. Insert Block Name and Ground Floor Position.
3. Select 'SAVE'.

Edit Block (Optional)

1. Select Edit beside Block Name.
2. Rename Block and/or change ground floor position.
3. Select 'SAVE'.

Add Level

Add Individual Level

1. Select Add beside Block Name.
2. Choose the level type:
   • Level Below Ground: Basement Level
   • Level Above Ground
3. Add Level Name.
4. Add Level Height.
5. Select 'SAVE'.

Add Multiple Levels

1. Select Add beside Block Name to add new levels under that block.
2. Choose the level type:
   • Level Below Ground: Basement Level
   • Level Above Ground
3. Add desired number of levels (greater than 1).
4. Leave Level Name blank (rename after added).
5. Add Level Height (all levels will use the same height).
6. Select 'SAVE'.

Rename Level (Optional)

1. Select Edit beside Level Name.
2. Rename Level and/or change its height.
3. Select 'SAVE'.

Add Footprint

1. Navigate to the building location on the map either by searching or dragging the map.
2. Select 'EDIT' beside Block Name to enter edit mode.
3. Trace the block’s outline by selecting points on the map.
4. Select 'EDITING' beside Block Name to exit edit mode.

Tip: A node can be repositioned by selecting it and dragging it to a different position.