V2/CMS Tutorial/User Tools/Creating Content/Site/Add Site/Bespoke

Add Site with Bespoke Model

Adding a Site using a User Drawn Model can be broken down into five major steps:

1. Create New Site
2. Fill in General Information
3. Choose Model Type
4. Upload 3D Model
5. Set Default View and Thumbnail

Note: Mandatory fields are marked with an ‘*’. The following steps assume that the user is already logged in to the CMS.

Create New Site

Steps to create a new Site

1. Go to the Site tab.
2. Select ADD NEW. Go to Fill in General Information.

Fill in General Information

Fill in site's general information

1. Fill in the necessary fields (E.g. Site Name, Description, Country, Address etc.).
2. Add Geolocation (optional):
   1. Select Geolocation.
   2. There are two ways to select location:
      • Search:
      1. Use the Search function to look for the specific location.
      • Drop Pin:
      1. Drag the map to the required location.
      2. Select "EDIT".
      3. Drop pin at the site location on the map.
      • See Tip and Note (below).
   3. Select 'OK' to add geolocation. This will automatically update the country of the site but not its address.
3. Select "NEXT". Go to Choose Model Type.

Tip: Subsequently, the pin can be dragged to different positions on the map.

Note: For subsequent changes, the displayed address will not be automatically updated. The Use Address button must be selected to update the address.

Choose Model Type

Choose Bespoke Model Type

1. Choose Bespoke model type.
2. Go to Upload 3D Model.

Upload 3D Model

Steps to upload 3D Model to build site

1. Select "Choose file" to select and upload a 3D building model Zip File.
2. Select SUBMIT (top right corner) to add the site.
3. Once the 3D model has been processed, further action will be prompted.
   

   Prompt for further action

Set Default View and Thumbnail

Steps to add site's default view and thumbnail

1. Select Edit beside the site you just created.
2. Select the warning at the top of the screen.
3. Set the site’s default view.
4. Set the site’s thumbnail (optional).
5. Add 2D Floorplans for each level (optional).
6. Select 'SAVE' or 'SAVE & EXIT' (top right corner).