Difference between revisions of "V2/CMS Tutorial/User Tools/Creating Content/Site/Add Site/Handdrawn"

From Senfi Docs
Jump to: navigation, search
Line 1: Line 1:
 
<h1 class="main-heading">Add Site with Hand Drawn Model</h1>
 
<h1 class="main-heading">Add Site with Hand Drawn Model</h1>
 +
 +
This section covers the following topics:
 +
* [[#Steps|Add Site]]
 +
* [[#Fill in BBL information|Fill in BBL information]]
 +
* [[#Add Footprint|footprint]]
  
 
<div class="important">Note: Mandatory fields are marked with an ‘*’. The following steps assume that the user is already logged in. </div>
 
<div class="important">Note: Mandatory fields are marked with an ‘*’. The following steps assume that the user is already logged in. </div>
Line 14: Line 19:
 
## Select '''OK''' to add geolocation. This will automatically update the country of the site but not its address.
 
## Select '''OK''' to add geolocation. This will automatically update the country of the site but not its address.
 
# Choose '''User Drawn''' model type.  
 
# Choose '''User Drawn''' model type.  
−
# Add BBL information under '''Building, Block & Level''' section.
+
# Fill in [[#Fill in BBL information|Building, Block & Level]] (BBL) information under '''Building, Block & Level''' section.  
−
#* Add Building (Optional):
+
# Draw site’s [[#Add Footprint|footprint]].
−
## Select [[File:Add_Inside.png|30px|link=]] '''Add''' beside '''Site Name'''.
 
−
## Insert '''Building Name'''.
 
−
## Select '''SAVE'''.
 
−
#* Rename Building (Optional):
 
−
## Select [[File:edit_inside.png|30px|link=]]'''Edit''' beside '''Building Name'''.
 
−
## Rename Building. 
 
−
## Select '''SAVE'''.
 
−
#* Add Block (Optional):
 
−
## Select [[File:Add_Inside.png|30px|link=]] '''Add''' beside '''Building Name'''.
 
−
## Insert '''Block Name''' and '''Ground Floor Position'''.
 
−
## Select '''SAVE'''.
 
−
#* Edit Block (Optional):
 
−
## Select [[File:edit_inside.png|30px|link=]]'''Edit''' beside '''Block Name'''.
 
−
## Rename Block and/or change ground floor position. 
 
−
## Select '''SAVE'''.
 
−
#* Add Level.
 
−
## You can add '''individual level''' or '''multiple levels''':
 
−
##* '''Individual Level''':
 
−
### Select [[File:Add_Inside.png|30px|link=]] '''Add''' beside '''Block Name'''.
 
−
### Choose the level type:
 
−
###* Level Below Ground: Basement Level
 
−
###* Level Above Ground
 
−
### Add Level Name.
 
−
### Add Level Height.
 
−
### Select '''SAVE'''.
 
−
##* '''Multiple Levels''':
 
−
### Select [[File:Add_Inside.png|30px|link=]] '''Add''' beside '''Block Name''' to add new levels under that block.
 
−
### Choose the level type:
 
−
###* Level Below Ground: Basement Level
 
−
###* Level Above Ground
 
−
### Add desired number of levels (greater than 1).
 
−
### Leave Level Name blank (rename after added).
 
−
### Add Level Height (all levels will use the same height).
 
−
### Select '''SAVE'''.
 
−
#* Rename Level (Optional):
 
−
## Select [[File:edit_inside.png|30px|link=]]'''Edit''' beside '''Level Name'''.
 
−
## Rename Level and/or change its height. 
 
−
## Select '''SAVE'''.
 
−
# Draw the site’s '''footprint''':
 
−
## Navigate to the building location on the map either by [[File:search_map|70px|link=]] '''searching''' or '''dragging the map'''.
 
−
## Select '''EDIT''' beside '''Block Name''' to enter edit mode.
 
−
## Trace the block’s outline by selecting points on the map.
 
−
##* '''Tip:''' A node can be repositioned by selecting it and dragging it to a different position.
 
−
## Select '''EDITING''' beside '''Block Name''' to exit edit mode.
 
 
# Select '''SUBMIT''' (top right corner) to add the site.  
 
# Select '''SUBMIT''' (top right corner) to add the site.  
 
# Once the 3D model has been processed, '''further action''' will be prompted. [[File:Action_required.png|thumb|800px|center|Prompt for further action|link=]]
 
# Once the 3D model has been processed, '''further action''' will be prompted. [[File:Action_required.png|thumb|800px|center|Prompt for further action|link=]]
Line 71: Line 32:
 
<div class="important">Tip: Subsequently, the pin can be dragged to different positions on the map. </div>
 
<div class="important">Tip: Subsequently, the pin can be dragged to different positions on the map. </div>
 
<div class="important">Note: For subsequent changes, the displayed address will not be automatically updated. The [[File:use_address.png|70px|link=]] '''Use Address''' button must be selected to update the address. </div>
 
<div class="important">Note: For subsequent changes, the displayed address will not be automatically updated. The [[File:use_address.png|70px|link=]] '''Use Address''' button must be selected to update the address. </div>
 +
 +
===Fill in BBL Information===
 +
====Add Building (Optional)====
 +
# Select [[File:Add_Inside.png|30px|link=]] '''Add''' beside '''Site Name'''.
 +
# Insert '''Building Name'''.
 +
# Select '''SAVE'''.
 +
 +
====Rename Building (Optional)====
 +
# Select [[File:edit_inside.png|30px|link=]]'''Edit''' beside '''Building Name'''.
 +
# Rename Building. 
 +
# Select '''SAVE'''.
 +
 +
====Add Block (Optional)====
 +
# Select [[File:Add_Inside.png|30px|link=]] '''Add''' beside '''Building Name'''.
 +
# Insert '''Block Name''' and '''Ground Floor Position'''.
 +
# Select '''SAVE'''.
 +
 +
====Edit Block (Optional)====
 +
# Select [[File:edit_inside.png|30px|link=]]'''Edit''' beside '''Block Name'''.
 +
# Rename Block and/or change ground floor position. 
 +
# Select '''SAVE'''.
 +
 +
====Add Level====
 +
=====Add Individual Level=====
 +
# Select [[File:Add_Inside.png|30px|link=]] '''Add''' beside '''Block Name'''.
 +
# Choose the level type:
 +
#* Level Below Ground: Basement Level
 +
#* Level Above Ground
 +
# Add Level Name.
 +
# Add Level Height.
 +
# Select '''SAVE'''.
 +
 +
=====Add Multiple Levels=====
 +
# Select [[File:Add_Inside.png|30px|link=]] '''Add''' beside '''Block Name''' to add new levels under that block.
 +
# Choose the level type:
 +
#* Level Below Ground: Basement Level
 +
#* Level Above Ground
 +
# Add desired number of levels (greater than 1).
 +
# Leave Level Name blank (rename after added).
 +
# Add Level Height (all levels will use the same height).
 +
# Select '''SAVE'''.
 +
 +
====Rename Level (Optional)====
 +
# Select [[File:edit_inside.png|30px|link=]]'''Edit''' beside '''Level Name'''.
 +
# Rename Level and/or change its height. 
 +
# Select '''SAVE'''.
 +
 +
===Add Footprint===
 +
# Navigate to the building location on the map either by [[File:search_map.png|170px|link=]] '''searching''' or '''dragging the map'''.
 +
# Select '''EDIT''' beside '''Block Name''' to enter edit mode.
 +
# Trace the block’s outline by selecting points on the map.
 +
# Select '''EDITING''' beside '''Block Name''' to exit edit mode.
 +
 +
<div class="important">Tip: A node can be repositioned by selecting it and dragging it to a different position. </div>

Revision as of 18:47, 21 June 2021

Add Site with Hand Drawn Model

This section covers the following topics:

Note: Mandatory fields are marked with an ‘*’. The following steps assume that the user is already logged in.

Steps

  1. Go to the Site icon.pngSite tab and select Add.pngADD NEW.
  2. Fill in the necessary fields (E.g. Site Name, Description, Country, Address etc.).
  3. Add Geolocation (optional):
    1. Select Geolocation.
    2. There are two ways to select location:
      • Search: Use the Search.pngSearch function to look for the specific location.
      • Drop Pin: Select EDIT and drop pin on the map.
      • See Tip and Note (below).
    3. Select OK to add geolocation. This will automatically update the country of the site but not its address.
  4. Choose User Drawn model type.
  5. Fill in Building, Block & Level (BBL) information under Building, Block & Level section.
  6. Draw site’s footprint.
  7. Select SUBMIT (top right corner) to add the site.
  8. Once the 3D model has been processed, further action will be prompted.
    Prompt for further action
  9. Select Edit.pngEdit beside the site you just created.
  10. Select the Warning set default.pngwarning at the top of the screen.
  11. Set the site’s default view.
  12. Set the site’s thumbnail (optional).
  13. Add 2D Floorplans for each level (optional).
  14. Select SAVE or SAVE & EXIT (top right corner).
Tip: Subsequently, the pin can be dragged to different positions on the map.
Note: For subsequent changes, the displayed address will not be automatically updated. The Use address.pngUse Address button must be selected to update the address.

Fill in BBL Information

Add Building (Optional)

  1. Select Add Inside.pngAdd beside Site Name.
  2. Insert Building Name.
  3. Select SAVE.

Rename Building (Optional)

  1. Select Edit inside.pngEdit beside Building Name.
  2. Rename Building.
  3. Select SAVE.

Add Block (Optional)

  1. Select Add Inside.pngAdd beside Building Name.
  2. Insert Block Name and Ground Floor Position.
  3. Select SAVE.

Edit Block (Optional)

  1. Select Edit inside.pngEdit beside Block Name.
  2. Rename Block and/or change ground floor position.
  3. Select SAVE.

Add Level

Add Individual Level
  1. Select Add Inside.pngAdd beside Block Name.
  2. Choose the level type:
    • Level Below Ground: Basement Level
    • Level Above Ground
  3. Add Level Name.
  4. Add Level Height.
  5. Select SAVE.
Add Multiple Levels
  1. Select Add Inside.pngAdd beside Block Name to add new levels under that block.
  2. Choose the level type:
    • Level Below Ground: Basement Level
    • Level Above Ground
  3. Add desired number of levels (greater than 1).
  4. Leave Level Name blank (rename after added).
  5. Add Level Height (all levels will use the same height).
  6. Select SAVE.

Rename Level (Optional)

  1. Select Edit inside.pngEdit beside Level Name.
  2. Rename Level and/or change its height.
  3. Select SAVE.

Add Footprint

  1. Navigate to the building location on the map either by Search map.pngsearching or dragging the map.
  2. Select EDIT beside Block Name to enter edit mode.
  3. Trace the block’s outline by selecting points on the map.
  4. Select EDITING beside Block Name to exit edit mode.
Tip: A node can be repositioned by selecting it and dragging it to a different position.
Retrieved from "https://www.senfi.io/docs/index.php?title=V2/CMS_Tutorial/User_Tools/Creating_Content/Site/Add_Site/Handdrawn&oldid=2222"