Difference between revisions of "V2/CMS Tutorial/User Tools/Creating Content/Site/Add Site/Handdrawn"

From Senfi Docs
Jump to: navigation, search
Line 1: Line 1:
−
<h1 class="main-heading">Add Site with Hand Drawn Model</h1>
+
<h1 class="main-heading">Add Site with User Drawn Model</h1>
  
−
This section covers the following topics:
+
Adding a site using a User Drawn Model can be broken down into six major steps:
−
* [[#Steps|General Steps]]
+
# [[#Create New Site|Create New Site]]
−
* [[#Fill in BBL Information|Fill in BBL information]]
+
# [[#Fill in General Information|Fill in General Information]]
−
* [[#Add Footprint|Footprint]]
+
# [[#Choose Model Type|Choose Model Type]]
 +
# [[#Fill in BBL Information|Fill in BBL information]]
 +
# [[#Add Footprint|Add Footprint]]
 +
# [[#Set Default View and Thumbnail|Set Default View and Thumbnail]]
  
 
<div class="important">Note: Mandatory fields are marked with an ‘*’. The following steps assume that the user is already logged in to the [https://app.senfi.io/cms/ CMS]. </div>
 
<div class="important">Note: Mandatory fields are marked with an ‘*’. The following steps assume that the user is already logged in to the [https://app.senfi.io/cms/ CMS]. </div>
  
−
===Steps===
+
===Create New Site===
−
# Go to the [[File:site_icon.png|30px|link=]] '''Site''' tab and select [[File:add.png|70px|link=]] '''ADD NEW'''.
+
[[File:Create_site_steps.png|thumb|center|600px|Steps to create a new site|link=]]
 +
# Go to the [[File:site_icon.png|30px|link=]] '''Site''' tab.
 +
# Select [[File:add.png|70px|link=]] '''ADD NEW'''. Go to [[#Fill in General Information|Fill in General Information]].
 +
 
 +
===Fill in General Information===
 +
[[File:Fill_in_site_information.png|thumb|center|600px|Fill in site's general information|link=]]
 
# Fill in the necessary fields (E.g. Site Name, Description, Country, Address etc.).  
 
# Fill in the necessary fields (E.g. Site Name, Description, Country, Address etc.).  
 
# Add '''Geolocation''' (optional):
 
# Add '''Geolocation''' (optional):
 
## Select '''Geolocation'''.
 
## Select '''Geolocation'''.
 
## There are two ways to '''select location''':
 
## There are two ways to '''select location''':
−
##* '''Search:''' Use the [[File:search.png|100px|link=]] '''Search''' function to look for the specific location.
+
##* '''Search:'''  
−
##* '''Drop Pin:''' Select '''EDIT''' and '''drop pin''' on the map.  
+
### Use the [[File:search.png|100px|link=]] '''Search''' function to look for the specific location.
 +
##* '''Drop Pin:'''  
 +
### Drag the map to the required location.
 +
### Select "EDIT".
 +
###'''Drop pin''' at the site location on the map.  
 
##* See Tip and Note (below).
 
##* See Tip and Note (below).
 
## Select 'OK' to add geolocation. This will automatically update the country of the site but not its address.
 
## Select 'OK' to add geolocation. This will automatically update the country of the site but not its address.
−
# Choose '''User Drawn''' model type.
+
# Select "NEXT". Go to [[#Choose Model Type|Choose Model Type]].
−
# Fill in [[#Fill in BBL information|Building, Block & Level]] (BBL) information under '''Building, Block & Level''' section.  
 
−
# Draw site’s [[#Add Footprint|footprint]].
 
−
# Select 'SUBMIT' (top right corner) to add the site.
 
−
# Once the 3D model has been processed, '''further action''' will be prompted. [[File:Action_required.png|thumb|800px|center|Prompt for further action|link=]]
 
−
# Select [[File:Edit.png|40px|link=]] '''Edit''' beside the site you just created.
 
−
# Select the [[File:Warning_set_default.png|200px|link=]] '''warning''' at the top of the screen.
 
−
# Set the site’s '''default view'''.
 
−
# Set the site’s '''thumbnail''' (optional).
 
−
# Add [[V2/CMS_Tutorial/User_Tools/Creating_Content/Site/Add_Site/2D_Floorplan|2D Floorplans]] for each level (optional).
 
−
# Select 'SAVE' or 'SAVE & EXIT' (top right corner).
 
  
 
<div class="important">Tip: Subsequently, the pin can be dragged to different positions on the map. </div>
 
<div class="important">Tip: Subsequently, the pin can be dragged to different positions on the map. </div>
 
<div class="important">Note: For subsequent changes, the displayed address will not be automatically updated. The [[File:use_address.png|70px|link=]] '''Use Address''' button must be selected to update the address. </div>
 
<div class="important">Note: For subsequent changes, the displayed address will not be automatically updated. The [[File:use_address.png|70px|link=]] '''Use Address''' button must be selected to update the address. </div>
 +
 +
=== Choose Model Type ===
 +
[[File:Choose_model_type.png|thumb|center|600px|Choose User Drawn Model Type|link=]]
 +
# Choose '''User Drawn''' model type.
 +
# Go to [[#Fill in BBL information|Fill in Building, Block & Level (BBL) information]].
  
 
===Fill in BBL Information===
 
===Fill in BBL Information===
−
====Add Building (Optional)====
+
[[File:Add_BBL_steps.png|thumb|center|600px|Steps to add Building, Block & Level (BBL) to site|link=]]
−
# Select [[File:Add_Inside.png|30px|link=]] '''Add''' beside '''Site Name'''.
+
# Add Building (Optional).
−
# Insert '''Building Name'''.
+
## Select [[File:Add_Inside.png|30px|link=]] '''Add''' beside '''Site Name'''.
−
# Select 'SAVE'.
+
## Insert '''Building Name'''.
−
 
+
## Select 'SAVE'.
−
====Rename Building (Optional)====
+
# Rename Building (Optional).
−
# Select [[File:edit_inside.png|30px|link=]]'''Edit''' beside '''Building Name'''.
+
## Select [[File:edit_inside.png|30px|link=]]'''Edit''' beside '''Building Name'''.
−
# Rename Building.   
+
## Rename Building.   
−
# Select 'SAVE'.  
+
## Select 'SAVE'.  
−
 
+
# Add Block (Optional).
−
====Add Block (Optional)====
+
## Select [[File:Add_Inside.png|30px|link=]] '''Add''' beside '''Building Name'''.
−
# Select [[File:Add_Inside.png|30px|link=]] '''Add''' beside '''Building Name'''.
+
## Insert '''Block Name''' and '''Ground Floor Position'''.
−
# Insert '''Block Name''' and '''Ground Floor Position'''.
+
## Select 'SAVE'.
−
# Select 'SAVE'.
+
# Edit Block (Optional).
−
 
+
## Select [[File:edit_inside.png|30px|link=]]'''Edit''' beside '''Block Name'''.
−
====Edit Block (Optional)====
+
## Rename Block and/or change ground floor position.   
−
# Select [[File:edit_inside.png|30px|link=]]'''Edit''' beside '''Block Name'''.
+
## Select 'SAVE'.
−
# Rename Block and/or change ground floor position.   
+
# Add Level.
−
# Select 'SAVE'.
+
#* Add Individual Level:
−
 
+
## Select [[File:Add_Inside.png|30px|link=]] '''Add''' beside '''Block Name'''.
−
====Add Level====
+
## Choose the level type:
−
=====Add Individual Level=====
+
##* Level Below Ground: Basement Level
−
# Select [[File:Add_Inside.png|30px|link=]] '''Add''' beside '''Block Name'''.
+
##* Level Above Ground  
−
# Choose the level type:
+
## Add Level Name.
−
#* Level Below Ground: Basement Level
+
## Add Level Height.
−
#* Level Above Ground  
+
## Select 'SAVE'.
−
# Add Level Name.
+
#* Add Multiple Levels:
−
# Add Level Height.
+
## Select [[File:Add_Inside.png|30px|link=]] '''Add''' beside '''Block Name''' to add new levels under that block.
−
# Select 'SAVE'.
+
## Choose the level type:
−
 
+
##* Level Below Ground: Basement Level
−
=====Add Multiple Levels=====
+
##* Level Above Ground  
−
# Select [[File:Add_Inside.png|30px|link=]] '''Add''' beside '''Block Name''' to add new levels under that block.
+
## Add desired number of levels (greater than 1).
−
# Choose the level type:
+
## Leave Level Name blank (rename after added).
−
#* Level Below Ground: Basement Level
+
## Add Level Height (all levels will use the same height).
−
#* Level Above Ground  
+
## Select 'SAVE'.
−
# Add desired number of levels (greater than 1).
+
# Edit Level (Optional).
−
# Leave Level Name blank (rename after added).
+
## Select [[File:edit_inside.png|30px|link=]]'''Edit''' beside '''Level Name'''.
−
# Add Level Height (all levels will use the same height).
+
## Rename Level and/or change its height.   
−
# Select 'SAVE'.
+
## Select 'SAVE'.
−
 
+
# Select "NEXT". Go to [[#Add Footprint|Add Footprint]].
−
====Rename Level (Optional)====
 
−
# Select [[File:edit_inside.png|30px|link=]]'''Edit''' beside '''Level Name'''.
 
−
# Rename Level and/or change its height.   
 
−
# Select 'SAVE'.  
 
  
 
===Add Footprint===
 
===Add Footprint===
 +
[[File:Add_footprint_steps.png|thumb|center|600px|Steps to add site's footprint|link=]]
 
# Navigate to the building location on the map either by [[File:search_map.png|170px|link=]] '''searching''' or '''dragging the map'''.  
 
# Navigate to the building location on the map either by [[File:search_map.png|170px|link=]] '''searching''' or '''dragging the map'''.  
−
# Select 'EDIT' beside '''Block Name''' to enter edit mode.
+
# Select "EDIT" beside '''Block Name''' to enter edit mode.
 
# Trace the block’s outline by selecting points on the map.
 
# Trace the block’s outline by selecting points on the map.
−
# Select 'EDITING' beside '''Block Name''' to exit edit mode.
+
# Select "EDITING" beside '''Block Name''' to exit edit mode.
 +
# Select "SUBMIT" (top right corner) to add the site.
 +
# Once the 3D model has been processed, '''further action''' will be prompted. [[File:Action_required.png|thumb|800px|center|Prompt for further action|link=]]
 +
# Go to [[#Set Default View and Thumbnail|Set Default View and Thumbnail]].
 +
 
 +
<div class="important">Tip:
 +
* A node can be repositioned by selecting it and dragging it to a different position.
 +
* "GO TO LATITUDE AND LONGTITUDE LOCATION" can be used to reposition the map to the location of the site's footprint. </div>
  
−
<div class="important">Tip: A node can be repositioned by selecting it and dragging it to a different position. </div>
+
=== Set Default View and Thumbnail ===
 +
[[File:Add_default_steps.png|thumb|center|600px|Steps to add site's default view and thumbnail|link=]]
 +
# Select [[File:Edit.png|40px|link=]] '''Edit''' beside the site you just created.
 +
# Select the [[File:Warning_set_default.png|200px|link=]] '''warning''' at the top of the screen.
 +
# Set the site’s '''default view'''.
 +
# Set the site’s '''thumbnail''' (optional).  
 +
# Add [[V2/CMS_Tutorial/User_Tools/Creating_Content/Site/Add_Site/2D_Floorplan|2D Floorplans]] for each level (optional).
 +
# Select 'SAVE' or 'SAVE & EXIT' (top right corner).

Revision as of 17:41, 29 June 2021

Add Site with User Drawn Model

Adding a site using a User Drawn Model can be broken down into six major steps:

  1. Create New Site
  2. Fill in General Information
  3. Choose Model Type
  4. Fill in BBL information
  5. Add Footprint
  6. Set Default View and Thumbnail
Note: Mandatory fields are marked with an ‘*’. The following steps assume that the user is already logged in to the CMS.

Create New Site

Steps to create a new site
  1. Go to the Site icon.pngSite tab.
  2. Select Add.pngADD NEW. Go to Fill in General Information.

Fill in General Information

Fill in site's general information
  1. Fill in the necessary fields (E.g. Site Name, Description, Country, Address etc.).
  2. Add Geolocation (optional):
    1. Select Geolocation.
    2. There are two ways to select location:
      • Search:
      1. Use the Search.pngSearch function to look for the specific location.
      • Drop Pin:
      1. Drag the map to the required location.
      2. Select "EDIT".
      3. Drop pin at the site location on the map.
      • See Tip and Note (below).
    3. Select 'OK' to add geolocation. This will automatically update the country of the site but not its address.
  3. Select "NEXT". Go to Choose Model Type.
Tip: Subsequently, the pin can be dragged to different positions on the map.
Note: For subsequent changes, the displayed address will not be automatically updated. The Use address.pngUse Address button must be selected to update the address.

Choose Model Type

Choose User Drawn Model Type
  1. Choose User Drawn model type.
  2. Go to Fill in Building, Block & Level (BBL) information.

Fill in BBL Information

Steps to add Building, Block & Level (BBL) to site
  1. Add Building (Optional).
    1. Select Add Inside.pngAdd beside Site Name.
    2. Insert Building Name.
    3. Select 'SAVE'.
  2. Rename Building (Optional).
    1. Select Edit inside.pngEdit beside Building Name.
    2. Rename Building.
    3. Select 'SAVE'.
  3. Add Block (Optional).
    1. Select Add Inside.pngAdd beside Building Name.
    2. Insert Block Name and Ground Floor Position.
    3. Select 'SAVE'.
  4. Edit Block (Optional).
    1. Select Edit inside.pngEdit beside Block Name.
    2. Rename Block and/or change ground floor position.
    3. Select 'SAVE'.
  5. Add Level.
    • Add Individual Level:
    1. Select Add Inside.pngAdd beside Block Name.
    2. Choose the level type:
      • Level Below Ground: Basement Level
      • Level Above Ground
    3. Add Level Name.
    4. Add Level Height.
    5. Select 'SAVE'.
    • Add Multiple Levels:
    1. Select Add Inside.pngAdd beside Block Name to add new levels under that block.
    2. Choose the level type:
      • Level Below Ground: Basement Level
      • Level Above Ground
    3. Add desired number of levels (greater than 1).
    4. Leave Level Name blank (rename after added).
    5. Add Level Height (all levels will use the same height).
    6. Select 'SAVE'.
  6. Edit Level (Optional).
    1. Select Edit inside.pngEdit beside Level Name.
    2. Rename Level and/or change its height.
    3. Select 'SAVE'.
  7. Select "NEXT". Go to Add Footprint.

Add Footprint

Steps to add site's footprint
  1. Navigate to the building location on the map either by Search map.pngsearching or dragging the map.
  2. Select "EDIT" beside Block Name to enter edit mode.
  3. Trace the block’s outline by selecting points on the map.
  4. Select "EDITING" beside Block Name to exit edit mode.
  5. Select "SUBMIT" (top right corner) to add the site.
  6. Once the 3D model has been processed, further action will be prompted.
    Prompt for further action
  7. Go to Set Default View and Thumbnail.
Tip:
  • A node can be repositioned by selecting it and dragging it to a different position.
  • "GO TO LATITUDE AND LONGTITUDE LOCATION" can be used to reposition the map to the location of the site's footprint.

Set Default View and Thumbnail

File:Add default steps.png
Steps to add site's default view and thumbnail
  1. Select Edit.pngEdit beside the site you just created.
  2. Select the Warning set default.pngwarning at the top of the screen.
  3. Set the site’s default view.
  4. Set the site’s thumbnail (optional).
  5. Add 2D Floorplans for each level (optional).
  6. Select 'SAVE' or 'SAVE & EXIT' (top right corner).
Retrieved from "https://www.senfi.io/docs/index.php?title=V2/CMS_Tutorial/User_Tools/Creating_Content/Site/Add_Site/Handdrawn&oldid=2993"