View source for V2/Digital Twin Tutorial/Viewing Site/Navigate Site

<h1 class="main-heading">3D Navigation</h1>

[[File:Navigate_site.png|thumb|center|600px|3D Navigation of Site|link=]]

===Perspective View===
====Pan Model====
# Move cursor to within the '''3D Model Area'''.
# '''Click''' the mouse pad with '''two''' fingers.
# Move cursor to pan model in required direction.

====Tilt Model====
# Move cursor to within the '''3D Model Area'''.
# '''Click''' the mouse pad with '''one''' finger.
# Move cursor to tilt model in required direction.

====Zoom In/Out====
# Move cursor to within the '''3D Model Area'''.
# '''Place two''' fingers on the mouse pad.
# Scroll '''up/down''' to Zoom '''in/out'''.

===Tool Bar===
The tools available in the Tool Bar include: 
* [[File:Home_View.png|35px|link=]] [[#Home View|Home View]]
* [[File:Fit_To_View.png|35px|link=]] [[#Fit To View|Fit To View]]
* [[File:Model_Transparency.png|35px|link=]] [[#Toggle Model Transparency|Toggle Model Transparency]]
* [[File:Asset_Status.png|35px|link=]] [[#Toggle Asset Status|Toggle Asset Status]]
* [[File:Select_Model.png|35px|link=]] [[#Toggle Select Model|Toggle Select Model]]
* [[File:First_Person.png|35px|link=]] [[#First Person|First Person]]
* [[File:Camera_Interaction.png|35px|link=]] [[#Camera Interactions|Camera Interactions]]
* [[File:Measure.png|35px|link=]] [[#Measure|Measure]]
* [[File:Section_Analysis.png|35px|link=]] [[#Section Analysis|Section Analysis]]
* [[File:Explode.png|35px|link=]] [[#Explode Model|Explode Model]]
* [[File:Properties.png|35px|link=]] [[#Properties|Properties]]
* [[File:Settings.png|35px|link=]] [[#Settings|Settings]]

====Home View====
[[File:How_home_view_works.png|thumb|center|650px|How Home View works|link=]]

Selecting [[File:Home_View.png|30px|link=]] '''Home View''' shifts the 3D Model back to its default position.

====Fit To View====
[[File:How_fit_to_view_works.png|thumb|center|500px|How Fit To View works|link=]]

Selecting [[File:Fit_To_View.png|30px|link=]] '''Fit To View''' fits the entire 3D Model within the 3D Model Area.

====Toggle Model Transparency====
[[File:How_model_transparency_works.png|thumb|center|500px|How Toggle Model Transparency works|link=]]

Selecting [[File:Model_Transparency.png|30px|link=]] '''Toggle Model Transparency''' changes the transparency of the 3D Model.

====Toggle Asset Status====
[[File:How_toggle_asset_status_works.png|thumb|center|500px|How Toggle Asset Status works|link=]]

Selecting [[File:Asset_Status.png|30px|link=]] '''Toggle Asset Status''' changes the how assets are represented on the 3D Model.

====Toggle Select Model====
[[File:Model_information.png|thumb|center|650px|Toggle Select Model|link=]]

Selecting [[File:Select_Model.png|30px|link=]] '''Toggle Select Model''' allows you to select individual pieces on the 3D Model and get more information about them.

====First Person====
Selecting [[File:First_Person.png|30px|link=]] '''First Person''' changes the 3D Model navigation mode to First Person. 

[[File:Navigate_in_first_person.png|thumb|center|400px|Instructions on how to navigate in first person|link=]]

When selected, a pop-up detailing how to navigate in first person will appear.

====Camera Interactions====
Selecting [[File:Camera_Interaction.png|30px|link=]] '''Camera Interactions''' gives rise to 3 additional options:
* [[File:Fit_To_View.png|30px|link=]] [[#Fit To View|Fit To View]]
* [[File:Focal_Length.png|30px|link=]] '''Focal Length:''' Change the Focal Length of the 3D Model.
# Move cursor to within the '''3D Model Area'''.
# '''Click''' the mouse pad with '''one''' finger.
# Move cursor to change focal length as desired.
* [[File:Roll.png|30px|link=]] Roll: Roll the 3D Model around.
# Move cursor to within the '''3D Model Area'''.
# '''Click''' the mouse pad with '''one''' finger.
# Move cursor to roll model.

====Measure====
Selecting [[File:Measure.png|30px|link=]] '''Measure''' gives rise to 5 additional options:
* [[File:Distance.png|30px|link=]] '''Distance:''' Measure the distance between two points on the 3D Model. 
# Select two points on the 3D Model.
* [[File:Angle.png|30px|link=]] '''Angle:''' Calculate the angle between two points.
# Select two points on the 3D Model.
#* The X, Y, Z distance between the two points will be displayed.
* [[File:Calibrate.png|30px|link=]] '''Calibrate:''' Adjust the readings of the model measurement tool.
# Select two points on the 3D Model.
# Define the size that it represents.
#* Change the "Unit Type" by choosing from the '''Unit type dropdown list'''.
* [[File:Delete_Measurement.png|30px|link=]] '''Delete:''' Delete a measurement from the model.
# Select the measurement.
# Select [[File:Delete_Measurement.png|30px|link=]] '''Delete'''.
* [[File:Measurement_Settings.png|30px|link=]] '''Measure Settings:'''
** Change the "Unit Type" of measurements by choosing from the '''Unit type dropdown list'''. 
** Change the "Precision" of measurements by choosing from the '''Precision dropdown list'''. 
** Change preference for Isolate Measurement (show only the measurements on the 3D Model):
*** [[File:Isolate_Measurement.png|150px|link=]] '''Enable''' Isolate Measurement
*** [[File:Not_Isolate_Measurement.png|150px|link=]] '''Disable''' Isolate Measurement 
** Change preference for Free Measure (measurements outside of the 3D Model is allowed):
*** [[File:Enable_Free_Measure.png|150px|link=]] '''Enable''' Free Measure
*** [[File:Disable_Free_Measure.png|150px|link=]] '''Disable''' Free Measure 

====Section Analysis====
Selecting [[File:Section_Analysis.png|30px|link=]] '''Section Analysis''' gives rise to 4 additional options:
* [[File:Add_x_plane.png|30px|link=]] '''Add X Plane:''' Add a plane along the model's X-Axis. [[File:X_Plane_Added.png|thumb|center|250px|X Plane added to 3D Model.|link=]]
** Move plane along the X-axis: '''Pull/Push''' the '''arrow'''.
** Rotate plane about the Y-axis: Select the '''blue''' line and move along the circle that appears.
** Rotate the plane about the Z-axis: Select the '''red''' line and move along the circle that appears.
* [[File:Add_y_plane.png|30px|link=]] '''Add Y Plane:''' Add a plane along the model's Y-Axis. [[File:Y_Plane_Added.png|thumb|center|350px|Y Plane added to 3D Model.|link=]]
** Move plane along the Y-axis: '''Pull/Push''' the '''arrow'''.
** Rotate plane about the Z-axis: Select the '''blue''' line and move along the circle that appears.
** Rotate the plane about the X-axis: Select the '''red''' line and move along the circle that appears.
* [[File:Add_z_plane.png|30px|link=]] '''Add Z Plane:''' Add a plane along the model's Z-Axis. [[File:Z_Plane_Added.png|thumb|center|250px|Z Plane added to 3D Model.|link=]]
** Move plane along the Z-axis: '''Pull/Push''' the '''arrow'''.
** Rotate plane about the X-axis: Select the '''blue''' line and move along the circle that appears.
** Rotate the plane about the Y-axis: Select the '''red''' line and move along the circle that appears.
* [[File:Add_cube.png|30px|link=]] '''Add Box:''' Add a box around the model. [[File:Cube_Added.png|thumb|center|350px|Box added to 3D Model.|link=]]
** Expand Box: Select the '''face of the box''' to be extended/shrunk and '''Pull/Push''' the '''arrow''' that appears.
** Shift Box: Select one of the axis/square on the Axis Model and move accordingly.

====Explode Model====
[[File:How_explode_model_works.png|thumb|center|500px|How Explode Model works|link=]]

Selecting [[File:Explode.png|30px|link=]] '''Explode Model''' takes the 3D Model apart.
* Sliding the scroll bar to the right moves individual pieces further from each other.

====Properties====
Selecting [[File:Properties.png|30px|link=]] '''Properties''' shows the name of a [[#Toggle Select Model|selected]] piece on the 3D Model.
* If no piece is selected, '''Max Scene''' is shown.

====Settings====
Selecting [[File:Settings.png|30px|link=]] '''Settings''' allows you to change the following settings:
* Configuration Settings
* Navigation Settings
* Appearance Settings
* Environment Settings